- Analogue voltage integrator for measuring all quality-relevant magnetic parameters
- Integrated calibration device
- Automatic probe identification
- Selection of measuring units
- Integrated comparator
- Self-testing function
- Peak value memory
- Analogue output
- Well-structured user interface
- Illuminated graphic display
- Demonstration software for PC connection
- Colour touchscreen
Operating principles
For measuring all magnetic properties of magnetic material relevant to quality control. Applications in e.g. research and development, automatic process control, quality control, and at incoming inspection. When the flux density is changed a voltage is induced proportional to the change in flux. The Fluxmeter F 100 integrates this voltage and indicates the voltage integral. The self-calibrating function of the instrument ensures that the measurements are always
accurate. Display of the measured values in a selection of scales: e.g. Tesla, A /m or Vs. In this way optimal use is made of the possible applications.
User-friendly features:
- Drift compensation • Digital display filter • Conversion of measuring scales
- Self-calibration • Window comparator • Percentage display • Physical probe parameters saved in memory
- Automatic probe identification • Choice of manual or automatic range
- Remote control via digital interfaces
Customer-specified probes also available
| Technical data: | Fluxmeter F 100 |
| Measuring principle | Integrator with very low drift with 24 bit A/D-converter |
| Measuring range | 500 μVs, 5, 50, 500 mVs |
| Resolution: | maximum 0,1 µVs |
| Range selection | automatic, manually |
| Linearity error | <0,01 % |
| Repeatability error | <0,02 % |
| Input resistance | 20 kOhm |
| Drift: | <1μVs per minute |
| Input resistance: | 1 kOhm, 10 kOhm ± 0,1 % |
| Connections: | Thermovoltage miniconnectors |
| Display: | Easy to use colour touch display simultaneous display of user selectable results access control by password to prevent uncontrolled changed to configuration |
| Audible feedback | Integrated beeper for user feedback and alarms |
| Digital I/O (optional) | 8 isolated digital Inputs and 8 isolated digital outputs |
| Analogue outputs (optional) | 1 x galvanically isolated, ± 10 V; 1 x configurable (average value, min / max, peak / peak, ± 10 V) |
| Peak value memory | digital recording at intervals of 20 ms, connectivity analogue recording for high-speed pulses (optional) |
| connectivity | Ethernet Connectivity and complete API for remote operation • Standard RJ45 connector • Manual IP assignment or DHCP • Valid unique MAC address |
| Dimensions: | 120 x 250 x 250 mm (height x width x depth) |
| Mains supply: | 210 – 250 V AC, 50 / 60 Hz |
Usable Coils
