- Three-channel Gaussmeter for determining the magnetic field strength of permanent magnets and systems
- Measurement of magnetizing pulses
- User-friendly measuring instrument
- Mains supply
- Application in laboratories and in production lines
- Field and temperature measurement via the probe input
- Automatic temperature compensation
- Application as a single-, two- or three-channel Gaussmeter
Multi-channel Gaussmeter with a resolution of 5 3/4 digits. Up to a maximum of three probes can be connected simultaneously. Each measuring channel is shown in one line in the display. Measurement of Hall voltage created in the Hall sensor which is proportional to the adjacent magnetic field.
All the functions are displayed and controlled via the front panel of the instrument. Input via keyboard, readings on a 4-line fluorescent display with alphanumerical text. Measuring range, zero, and functions such as max hold, relative or alarm, can be set individually for each channel.
Two analogue outputs provide high accuracy and the possibility to analyse the development of the field. The corrected analogue output shows the exact value displayed, the non-corrected analogue output shows the field strength in real time.
The comprehensive Hall probe programme includes over 500 different measuring probes, as well as conventional transverse and axial probes and probes for bi-and tri-axial measurements. BROCKHAUS also supplies probes for low temperature applications and for measuring minimal magnetic fields.
|Technical data:||Gaussmeter 460|
|Measuring mode:||measurement of Hall voltage|
|Measuring range:||300 mG, 3 G, 30 G, 300 G, 3 kG, 30 kG, 300 kG|
|Measuring frequency:||DC, 10 Hz – 400 Hz|
|Measuring accuracy:||± 0,1 % of DC value, ± 2 % of AC value|
0,005 % of measuring range
|Repeatability:||± 0,0007 %|
|Measuring rate:||4 measurements/sec / display|
18 measurements/sec / interface
|Selection of measuring range:||automatic or manual|
|Resolution:||5 3/4 digits (1 of ± 300.000)|
|Probe type:||all laboratory probes|
|Temperature range:||0°C – 40°C|
|Analogue outputs:||corrected and non-corrected ± 10 V|
|Power supply:||100 – 240 V AC, 50 / 60 Hz|
|Functions:||Max Hold, Filter, Alarm, Zero Probe, Relative Reading, Auto Range, Memory Hold, AC/DC, Gauss, Tesla, Keylock, Pulse Field Measurement|
|Accessories:||Zero gauss chamber, power cable, operating manual|
|Special accessories:||probe cable in lengths 3 / 7,6 / 15,24 / 30,49 m|
305 mm zero chamber / interface cable